Featured White Papers
Manufacturing Industry
Premier wheelbarrow
Concrete Construction, August, 2002
Contractors will find the Cariola Wheelbarrow Company's wheelbarrow to be exceptional. "It is light and well-balanced for those full loads of concrete," says Webb Construction's A. Kolomeitz. "They have run for over 3 years and are still going-with no maintenance." The wheelbarrow has a heavy polyethylene tub, a welded aluminum frame, sealed bearings, and a studded tire with a tube filled with puncture-resistant sealant at the factory. Tubs come in five standard colors, and an optional dual-wheel model is available. The tubs are replaceable. To learn more, contact Cariola Wheelbarrow at 888-506-6100, visit www.cariolawheelbarrow.com, or circle 22 on the Reader Service Card.
In the July issue we mistakenly stated that Partner's hydraulic ring saw is the K1250. It is actually the K3600.
Table 1--Match the loader to the job *
Characteristic Good Better Best
Rough-terrain operation SSL AWS CTL
Rated operating capacity SSL CTL AWS
Low ground disturbance SSL CTL AWS
Tire/track life cost CTL SSL AWS
Travel speed CTL SSL/AWS AWS/SSL
Breakout force SSL AWS CTL
Muddy conditions SSL AWS CTL
Pushing/grading force SSL AWS CTL
Purchase price CTL AWS SSL
AWS = All-wheel steer loader CTL = Compact track loader
SSL = Skid-steer loader
* Information provided by the Bobcat Company
Table 2--Compact track loaders--what's available
Engine Opearting
Make Model Power (hp) Capacity (lbs) **
ASV RC-30 31.5 560
RC-50 50 1050
Bobcat T190 56 1900
T200 73 2000
Caterpillar 247 58 1354
Mustang MTL16 67 1620
MTL25 101.5 2470
Polaris ASL 300 31.5 560
Rayco C85D 82 1925
Takeuchi TL130 67 1620
TL150 102 2470
Weight Width RS
Make (lbs) (in.) number ***
ASV 2935 46.5 9
4750 60 10
Bobcat 7244 66 11
8080 73 12
Caterpillar 6665 68 13
Mustang 7497 62.2 14
10,692 72.6 15
Polaris 2935 46.5 16
Rayco 8200 69 17
Takeuchi 7497 62.2 18
10,692 73.2 19
** While there are no specific definitions for tipping capacity of
rubber tracked loaders, this list is based on SAE J818, which defines
the operating capacity of tracked loaders as 35% of tipping capacity.
*** For more information circle the corresponding number on the Reader
Service Card.
COPYRIGHT 2002 Hanley-Wood, Inc.
COPYRIGHT 2008 Gale, Cengage Learning