7 Temporary Construction Containment Systems and What They Cost

A four-pole ZipWall kit lists at $212.25 (plastic not included, in the grand tradition of batteries), while the reusable panels topping this list cost about $180 to $530 per linear foot to buy. One price covers a single job and the other covers many, so they answer different questions.

So what do temporary construction containment systems cost once the wall has moved three times?

Here’s the short answer on cost:

STARC Systems is the best-value temporary construction containment system for work with more than one phase, because builders commonly break even after two to four installations versus temporary drywall, you can rent or buy, and the panels move on to your next project.

ZipWall is the low-cost pick for short jobs, with pole kits under $100, while SwiftWall offers rent-or-buy panels through dealers and Edge Guard publishes list prices for its polycarbonate panels.

Temporary Wall Systems rents walls with installation included, HEPACART sells mobile HEPA carts for ceiling work, and Abatement Technologies supplies the negative air machines behind the wall.

SystemHow you payPublished price (as of Nov 2026)Reusable
STARC SystemsBuy, or rent via partnersQuote onlyYes
ZipWallBuy outrightFrom $98.95Partly
SwiftWallBuy, or rent via partnersQuote onlyYes
Edge GuardBuy outrightFrom $315Yes
Temporary Wall SystemsInstalled rentalQuote onlyRental fleet
HEPACARTBuy outrightFrom $6,429Yes
Abatement TechnologiesBuy, or rent panelsQuote onlyYes

What goes into the cost of containment?

The figure on the quote covers materials. The full cost of containment adds the labor to build the barrier, the labor to take it down, and whatever it takes to do both again when the work moves to the next phase.

Framed drywall shows how the labor piles up. Industry estimates cited by this list’s top pick put poly sheeting containment at $1 to $2 per square foot and framed temporary drywall at $50 to $120 per linear foot, with labor, finishing, and demolition included.

Relocation is where single-use barriers get expensive, because a drywall partition can’t move. You demolish it, haul it off, and frame a new one, so a wall built five times costs about five times as much.

Disposal follows the same math. SwiftWall puts drywall waste at up to one ton of landfill for every 70 feet of wall, a figure to keep in mind when the hauling invoice arrives.

Then there’s the dust complaint, which appears on no estimate. A torn sheet or a gap at the ceiling line can mean cleaning an occupied floor, pausing the work, and an awkward meeting with the tenant.

1. STARC Systems: best value across multiple phases

For a project that moves its wall more than once, these reusable panels are the best-value containment on this list, because the same panels go up at phase one, come down, and go up again at phase two.

Good fit: Multi-phase renovations in occupied buildings, where the wall relocates as the work does. The company’s own guidance is to rent for jobs of one to four months and buy for longer ones, and many large customers own a core inventory and rent the extras.

What you pay for: Four systems from one maker: RealWall, LiteBarrier, StackBarrier for stacks up to 40 feet, and the one-hour fire-rated FireblockWall. With two workers, about 100 linear feet goes up per hour, and the lift-and-drop connection needs no tools.

The reuse numbers carry the cost case. Panels are reusable more than 50 times, builders commonly break even after two to four installations versus temporary drywall, and in the company’s own customer survey, 74% of users reported using them 11 or more times.

W.E. Bowman, a Richmond, Virginia healthcare contractor, ran 5,200 feet of containment over seven phases. The system paid for itself after five of those phases, with 75% overall savings versus drywall.

After McCarthy Building Companies used RealWall at Phoenix Sky Harbor, the airport bought the system for its own later projects. The company also estimates that reusing 100 linear feet five times avoids about five tons of landfill waste.

The maker takes rental inquiries directly and rents nationally through Sunbelt Rentals, its exclusive national rental partner, with 17 dedicated locations as of September 2026 and about 50 planned. More than 10 regional Select Partners cover other markets.

Published pricing: Quote only. The one public figure sits in the starter-kit FAQ, which puts purchase cost at about $180 to $530 per linear foot depending on the system.

Hidden costs: The time it takes to get a number. No rental rates are published and the only public price is that starter-kit purchase range, so you can’t compare renting against buying until both quotes are in hand.

2. ZipWall: best for the lowest upfront cost

ZipWall is the cheapest way on this list to get a dust barrier standing today. Spring-loaded poles hold plastic or fabric sheeting between floor and ceiling, and the company says a barrier sets up in a few minutes without ladders or tape.

Good fit: Short remodels, painting, sanding, and flooring jobs where the barrier comes down within days. ZipWall pitches its four-pole ZP4 kit at home remodels, and it secures a barrier up to 10 feet high and 30 feet wide.

What you pay for: Poles, zippers for a doorway, and a carry bag. The ZP4 includes four stainless steel poles and two standard zippers, a 20-foot two-pole pack handles tall rooms, and the Dust Barrier Toolkit bundles poles, tapeless seals, tracks, and a door kit for a barrier up to 16 feet wide.

Published pricing: As of November 2026, ZipWall lists the two-pole ZP2 at $98.95, the ZP4 at $212.25, the 20-foot two-pack at $298.05, and the Dust Barrier Toolkit at $1,414.16. Its washable, reusable ZipSheet fabric runs $34.99 to $112.49, and a 10-by-50-foot roll of plastic is $24.94.

Hidden costs: The sheeting, mostly. Plastic gets replaced job after job, and ZipWall’s own stock plastic is labeled as not flame-retardant, so fire-rated sheeting is a separate purchase. ZipWall also makes no sound-reduction claim for its barriers.

Two smaller limits are worth pricing in. The tapeless seals cover walls up to 9 feet, with tape handling anything above that, and the tallest poles reach 20 feet.

On the plus side, ZipWall backs everything except ZipDoors and zippers for two years. (The zipper door still has to be zipped by a human, which no warranty covers.)

3. SwiftWall: best for renting or buying through dealers

SwiftWall gives you two ways to pay for the same rigid panels. The Michigan maker sells them through a dealer network and names EquipmentShare as its national rental partner, with delivery, installation, and removal handled by partners.

Good fit: Commercial and facility teams that want a finished-looking panel wall and haven’t decided whether to own it. Renting first and buying later is a reasonable path here, since both options run through the same partner network.

What you pay for: A choice of panel lines. Pro uses ABS panels that the company says install five times faster than studs and drywall and last 20 or more reuses, while Max uses marine aluminum with STC 40 and Class A flame spread ratings. Lite is pitched as the most economical option.

Published pricing: Quote only, as of November 2026. SwiftWall says pricing depends on product, size, distance shipped, and customization, and its find-a-provider page lists 29 dealer and distribution entries where those quotes come from.

Hidden costs: The upgrade line items. Pro panels are Class C fire rated unless you add optional Class A aluminum skins, so a spec that calls for Class A changes the price. Rental terms and install crews also vary by partner, since SwiftWall doesn’t run a national rental fleet of its own.

On reuse, SwiftWall says well-maintained systems can be reused 15 times or more, and panels typically deliver from Midland, Michigan within three to five days. Ask each dealer what the rental rate includes, because delivery, install, and removal can be bundled or billed apart.

4. Edge Guard: best for published list prices on rigid panels

Edge Guard is the rare rigid-panel maker that puts list prices on its website. The Illinois company builds polycarbonate panels in aluminum frames and sells them outright, so you can price a wall with a calculator before you call anyone.

Good fit: Maintenance teams and contractors who want to own a small, light kit and set it up themselves. The panels let light through, come in widths from 6 to 48 inches, and adjust from 7 feet 8 inches to 10 feet, with a second line that reaches 12 feet.

What you pay for: Panels that fasten together without tools, with grid clips and camlocks included. Edge Guard says a 48-inch panel sets up in about two minutes, reports an ASTM E-84 Class A result for its panels, and says labor savings typically pay for the panels in two to three uses.

Published pricing: As of November 2026, list prices on Edge Guard’s site start at $315 for a 12-inch panel and reach $640 for a 48-inch panel in the 10-foot line. A ready-made 8-by-2-foot anteroom package lists at $3,570, a 12-by-2-foot package at $4,210, and a transport cart at $305.

Hidden costs: Your own labor, plus freight. No rental program or installation crew appears on the site, orders ship by freight from one Illinois plant within two weeks, and a few list prices differ from page to page, so confirm the total in writing before you budget.

Doors are priced apart from panels, with a double door listed at $2,195, and height stops at 12 feet for now. A tall lobby or atrium needs a different system.

5. Temporary Wall Systems: best for an all-in installed rental

Temporary Wall Systems is the pick when you’d like the wall to be someone else’s job. The franchise rents modular walls and sends local crews to deliver, assemble, and dismantle them, so there’s nothing to buy, store, or learn.

Good fit: Projects with a clear start and end date and no appetite for owning panels. TWS says it will rent for one month or one year, and its locations page shows more than 90 listed locations across the United States and Canada.

What you pay for: Service wrapped around a three-layer panel: an aluminum face, a 1.5-inch urethane foam core, and a galvanized steel back. Add-ons include doors, windows, keypad locks, vents, air scrubbers, and wall decals, and TWS says teardown can take as little as a couple of hours.

Published pricing: Quote only, as of November 2026. TWS says cost depends on the size of the area, the length of the project, and the branding options you choose, which is a fair summary of how any installed rental gets priced.

Hidden costs: The calendar. Rental is the only option, so a job that runs long keeps paying, and a company with back-to-back projects never ends up owning panels. Service also comes from the local franchise that covers your area, so ask who shows up for the mid-project move.

TWS also handles turnkey SHIELD WALL rentals for Abatement Technologies, which is handy to know if both names land on your bid list.

6. HEPACART: best for pricing ceiling work by the cart

HEPACART answers a narrow cost question: what does it take to open a ceiling without building a wall? Its mobile containment carts roll to the work, extend an enclosure up to the ceiling, and pull air through a HEPA filter with a 750 CFM fan.

Good fit: Facility maintenance, cabling, and electrical crews who open ceilings in many spots across a building. The Classic cart collapses to 29 inches wide for doorways, and the company describes it as built for ceiling and wall-cavity access.

What you pay for: A cart on heavy casters with an enclosure that reaches 10 feet 6 inches in standard form. The company also makes the AnteRoom, a door-mounted module that it says sets up without tools in under five minutes, and the AIR 1100 negative air machine.

Published pricing: As of November 2026, HEPACART’s web shop lists the Classic cart at $10,590 to $12,035 depending on size, the AnteRoom at $6,429 to $7,452, and the AIR 1100 at $1,595. Those are purchase prices, published in full, which is rare in this category.

Hidden costs: Scope, more than price. A cart contains one ceiling opening at a time and won’t wall off a corridor, and the standard AnteRoom needs a separate negative air machine. Reaching 14 feet takes add-on options.

The cost logic is per opening: the cart moves with the ladder, so there’s no barrier to build and strike at every tile. HEPACART also resells the #1 pick’s RealWall and LiteBarrier panels when a job needs full walls.

7. Abatement Technologies: best for budgeting the air side of containment

Abatement Technologies sells the part of containment that most walls on this list still need: negative air. Its HEPA-AIRE machines pull air through the work zone, and the company also makes AIRE GUARDIAN ceiling carts and SHIELD WALL modular panels.

Good fit: Abatement, restoration, and renovation contractors who want air machines, carts, and wall panels on one vendor’s quote. Founded in 1985, the company has offices in Suwanee, Georgia and Fort Erie, Ontario.

What you pay for: On the air side, the HEPA-AIRE H2KM moves 2,000 CFM on high through a 99.97% HEPA filter and runs on a 15-amp circuit. On the wall side, SHIELD WALL comes in four panel types, and the company says the system pays for itself after two to three uses.

Published pricing: Quote only, as of November 2026. Every product page on the manufacturer’s site ends in a quote request, so budget numbers come from a rep. You can buy SHIELD WALL from the company or rent it through Temporary Wall Systems, which handles the install.

Hidden costs: An air machine is an add to whatever barrier you pick, since it makes negative pressure inside a containment you still have to build. The H2KM also weighs 124 pounds with filters, and the CONNECT panel line isn’t suitable for pressurized containment, per the company.

When the quote arrives, ask what replacement filters cost and how often they’re changed, because the machine runs every shift the barrier is up.

Buy, rent, or have it installed?

Start with the calendar. The top pick’s maker suggests renting for jobs of one to four months and buying for longer ones, and that rule travels well across brands.

Buy when the wall will move. Reusable panels from the #1 pick, SwiftWall, Edge Guard, or SHIELD WALL earn their price back through repeat installs, and the payback claims from three of those makers land between two and four uses.

Rent when the job is a one-off or storage is a problem. SwiftWall’s partners and the Sunbelt Rentals locations that carry RealWall and LiteBarrier both let you hand the panels back when the phase ends.

Have it installed when your crew is already stretched. Temporary Wall Systems builds its whole model around that, with delivery, assembly, and removal inside the rental.

For a two-day job, buy the poles. A ZipWall pack starts under $100, and I’d keep one in the truck even with a rigid system on order.

If the work is above the ceiling, price a HEPACART against the labor of building a barrier at every opening. Then add Abatement Technologies or another HEPA machine to any wall that has to hold negative pressure.

The number that settles it: cost per use

Day-one price tells you what the first installation costs. Cost per use tells you what the fourth one costs, and that’s the number a multi-phase job runs on.

There’s one verified benchmark to work from: builders commonly break even on the top pick’s reusable panels after two to four installations versus temporary drywall. If your schedule shows the wall moving fewer times than that, rent it or go disposable.

If the schedule shows more moves, every one past break-even is savings. So count the moves before you count the dollars (the phasing plan already knows the answer, even if the estimate doesn’t).

FAQ

How much do temporary containment walls cost per linear foot?

One maker of reusable wall panels publishes a purchase range of about $180 to $530 per linear foot as of November 2026, and most other vendors quote each job. For comparison, industry estimates cited by that maker put framed temporary drywall at $50 to $120 per linear foot each time it’s built.

When does buying a containment system pay for itself?

Buying usually pays for itself once the same panels have gone up a few times, and the top-ranked maker here says builders commonly break even after two to four installations versus temporary drywall. Its guidance is to rent for jobs of one to four months and buy for longer ones.

What is the cheapest temporary containment that still works?

For a short, low-risk job, a pole-and-plastic kit is the cheapest containment that still does the work, with ZipWall’s two-pole pack listed at $98.95 as of November 2026. Fit depends on the job, since ZipWall’s own stock plastic isn’t flame-retardant.

Subscribe to Newsletter

Get the latest in technology, business, and culture in your inbox.