8 Compliant Dust Barriers for Healthcare Construction, Scored on Their Paperwork

CDC guidance says hospital construction barriers should be “impermeable to fungal spores and in compliance with local fire codes.” That’s a dust test and a fire test in one line, and both get settled on paper (a superintendent’s word that it’s sealed has yet to impress a fire marshal).

This piece covers barriers for construction and renovation inside occupied healthcare buildings, since the same words also describe dental barrier film and PPE. Eight compliant dust barriers for healthcare, four documents, one question: can you prove it?

If you just want the answer, here it is:

STARC Systems makes the best compliant dust barriers for healthcare projects, because it publishes its own ICRA Class IV and V statement, ASTM E84 Class A results, a one-hour ASTM E119 listing for FireblockWall, and negative air ports built into panels.

Rapid Room logs pressure over cellular, SwiftWall publishes fire classes by panel line, Abatement Technologies pairs SHIELD WALL panels with its own monitors, and Temporary Wall Systems rents walls with installers attached.

Edge Guard publishes its ASTM E-84 scores, HEPACART rates mobile carts for ceiling work, and ZipWall handles short plastic-sheeting tasks.

SystemICRA statement publishedFire test data publishedNegative-pressure supportPressure monitoring
STARC SystemsYesYesYesMonitor ports
Rapid RoomYesNot statedYesBuilt in
SwiftWallYesBy lineRoom kitsNot stated
Abatement TechnologiesYesYesYesSeparate monitor
Temporary Wall SystemsClass variesRating claimedYesNot stated
Edge GuardNo classYesHEPA portOptional gauge
HEPACARTYesNot statedYesIndicator included
ZipWallNoDoors onlyYesNot stated

Which documents prove a dust barrier is up to the job?

ICRA is a risk assessment the hospital’s own team runs for each project, and the class of precautions belongs to the project. A barrier maker can only publish claims and test results for that team to weigh, which is why the paper trail carries so much of the load.

  • ICRA class statement: The maker’s own wording on which classes of precautions its barrier is designed for. ASHE doesn’t rate or approve wall products, so this is always a manufacturer’s claim.
  • ASTM E84 report: A surface-burning test for flame spread and smoke. Class A means a flame spread index of 0 to 25 and a smoke-developed index of 0 to 450, and it says nothing about hourly fire resistance.
  • Fire-resistance listing, where a rated wall is required: That’s a separate test, ASTM E119. Whether your barrier needs one is a call for your code official and the hospital’s life safety plan.
  • Pressure log: For Class IV and V work, ASHE’s ICRA 2.0 tool keeps the whole work area under negative pressure, with a device outside the containment monitoring it continually.

Two cautions before the list. ASHE’s tool gives no pressure number, so the target is the differential the hospital’s ICRA plan sets. The Joint Commission’s FAQ also says to be ready to show evidence of limited combustibility during a survey, so keep the fire report within reach.

1. STARC Systems: best for a complete fire and ICRA paper trail

RealWall, LiteBarrier, and FireblockWall arrive with the thickest file on this scorecard.

Paperwork: The company states that RealWall and FireblockWall exceed ICRA Class IV and V, and that LiteBarrier exceeds ICRA Class IV. Intertek has verified an ASTM E84 Class A rating for RealWall, LiteBarrier, and FireblockWall.

FireblockWall adds a one-hour rating under ASTM E119, listed by Intertek, with an STC of 40. It’s the only reusable one-hour fire-rated temporary wall, according to the company, and the fire barriers are tested as assemblies.

On a hospital job: Panels seal with a foam top gasket and dual rubber bottom gaskets. Integrated negative air panels come with 12-inch duct collars, and built-in pressure ports accept your monitoring equipment with no extra fittings.

Speed helps next to patients, and the company puts installation at about 100 linear feet per hour with two workers. RealWall’s finish cleans with water- or solvent-based disinfectants, and LiteBarrier has a non-porous surface the company describes as easily disinfected.

Midwest Remediation, an Indiana and Ohio restoration contractor, built two parallel RealWall barriers into a negative-air chamber beside active operating rooms. The chamber exhausted outdoors through 12-inch ducting while pressure manometers monitored it throughout the project.

DPR Construction at Tucson Medical Center’s emergency department used RealWall to renovate an active ER. S+B James Construction at an active California cancer treatment center installed about 45 linear feet of FireblockWall in three days.

Cost: Quote only, with one published figure: a starter-kit purchase range of about $180 to $530 per linear foot, depending on the system. Panels are sold, and they rent nationally through Sunbelt Rentals and regional Select Partners.

Where the proof runs out: These walls are for interior, non-load-bearing use only. StackBarrier is certified ASTM E84 Class C as installed, with Class A available on request, and it carries no ICRA claim. Confirm the assembly with your authority having jurisdiction before you order.

2. Rapid Room: best for pressure logs you can export

Rapid Room is the barrier on this list that writes its own pressure record.

Paperwork: The company says its barriers exceed ICRA Class IV and V. Its BarrierLink service logs differential pressure through cellular sensors, emails an alert on a pressure excursion, and keeps every reading for a year, exportable to CSV.

A second layer sits on the wall itself. On the negative air panel, a flush-mounted monitor glows green while the barrier is holding and red when it isn’t, and you can read it from across the corridor.

On a hospital job: Imperial Privacy Systems makes Rapid Room in Pompano Beach, Florida. The 1500 Series uses aluminum panels that adjust from 7’10” to 10’8″ and attach with ceiling grid clips, with no drilling and no tools.

The company says two people can stand a typical corridor barrier in a few hours. A heavier 2500 Series adds a sound damping layer, pre-configured kits cover U-shaped anterooms, and every door carries a closer and keypad access control.

Cost: Wall pricing is quote only, as of November 2026, whether you buy or rent. On rentals, billing runs in 28-day periods with one period as the minimum, delivery and pickup get their own quote, and installation is an option.

Where the proof runs out: No fire rating, STC figure, or test report is published, and its spec-sheet page still shows placeholders. A hospital has to request the fire documentation directly, and no named hospital project appears on the site.

3. SwiftWall: best for fire data broken out by panel line

Paperwork: SwiftWall says its Pro, Max, and Flex panels support ICRA 2.0 Class IV and V containment. The fire data is published line by line, which helps when a fire marshal asks which panel is going up.

Max uses non-combustible aluminum panels that the company says meet NFPA 286 and ASTM E84 Class A, with an STC of 40. Pro is listed as Class C fire rated, with optional Class A aluminum skins, and Flex is offered in Class A and Class C versions.

On a hospital job: The Michigan maker sells or rents through partners, and it names EquipmentShare as its national rental partner. Its Negative Space Room kit, built from Pro and Flex panels, can be wired and vented to create negative pressure.

At Carolinas Medical Center in Charlotte, North Carolina, a negative pressure room built from SwiftWall Max isolated an active construction zone. For cleaning, the company calls Pro walls easy to disinfect and describes Max panels as non-porous.

SwiftWall also says its Pro, Max, and Flex lines install up to five times faster than drywall. Its healthcare page offers downloadable fire and smoke, negative pressure kit, and ICRA 2.0 pre-planning documents.

Cost: Quote only, as of November 2026, with pricing that SwiftWall says depends on product, size, distance shipped, and customization.

Where the proof runs out: Fire performance depends on the line you pick, so a hospital job has to specify Max or a Pro panel with the Class A skins. The published material describes no built-in pressure monitor, so plan to bring your own and log it yourself.

4. Abatement Technologies: best for monitors and air machines from one source

Paperwork: The company says its SHIELD WALL CLASSIC, CLEAR, and CORE panels comply with ICRA guidelines up to Class V. It also states that the panels’ surface burn characteristics exceed ASTM E84 Class A.

The pressure record comes from its own differential pressure monitors. The PPM3-S has built-in visual and audio alarms and archives history logs that download in CSV format, and the PPM4 can send alarm notifications by phone or email through a web platform.

On a hospital job: Abatement Technologies sells the air side too. Its HEPA-AIRE PAS1200UV portable air scrubber runs from 300 to 900 cfm with a 99.97% HEPA final stage, and AIRE GUARDIAN carts contain ceiling-cavity work.

The company says the three panel types, used with its monitor and an air scrubber, can form an anteroom or isolation space while holding negative pressure differentials. Panels can be bought, or rented as a turnkey install through Temporary Wall Systems.

SHIELD WALL’s healthcare page also says the materials can be easily cleaned, decontaminated, and reused. Doors lock, and the panel connectors are hidden.

Cost: Quote only on the manufacturer’s site, as of November 2026, for panels, monitors, and air machines alike.

Where the proof runs out: CONNECT panels don’t meet ICRA standards, by the company’s own footnote, so check the panel type on every quote. Negative pressure depends on adding the separate scrubber and monitor, and rentals follow the local TWS franchise footprint.

5. Temporary Wall Systems: best for a rented wall with an installer attached

Temporary Wall Systems is the pick when the hospital wants a crew accountable for the wall from delivery to teardown.

Paperwork: TWS markets its walls for ICRA projects and says its Core walls hold a Class A fire rating. It also says its installers are certified in ICRA work and trained to set up negative air and anterooms.

On a hospital job: The service is rental only. Local franchise technicians deliver, assemble, and dismantle walls built in three layers: an aluminum face, a 1.5-inch urethane foam core, and a galvanized steel back.

The company describes its Core walls as ready for anterooms and negative air, and it offers air scrubbers, keypad locks, and vents as add-ons. Its locations page shows more than 90 listed locations.

On one Wichita restoration job described on its site, a hospital hadn’t approved the plastic containment in place. The local TWS crew supplied hard-wall containment and negative air.

Cost: Quote only, as of November 2026, and TWS says the price depends on the size of the area, the length of the project, and any branding options.

Where the proof runs out: Its own pages disagree on the ICRA class, so get the class statement and the fire report in writing for the exact panel. Ask which training the installer certification refers to. Because it’s rental only, a hospital can’t own the panels for recurring work.

6. Edge Guard: best for published ASTM E-84 scores on a small kit

Paperwork: Edge Guard reports an ASTM E-84 Class A result for its polycarbonate panels and publishes the scores: 0 for flame spread and 85 for smoke developed. Having the numbers in print is handy at a survey.

On infection control, its product pages say only that the panels meet and exceed infection control guidelines. The company’s own planning checklist adds that a barrier should always be part of a facility-led infection-control plan.

On a hospital job: The Illinois maker, based in Bement, builds polycarbonate panels in aluminum frames with gaskets at the floor, sides, and ceiling. Anteroom packages include a panel with a HEPA discharge port and a transport cart.

A differential pressure gauge is sold as an add-on that mounts to any panel. The company says its panels can be cleaned and sanitized with ease, and that they’re included in a United Brotherhood of Carpenters health care training program.

Carle Foundation Hospital in Urbana, Illinois, is where it started, on a multiphase emergency department remodel the panels were designed for. Light passes through the panels, which saves on temporary lighting.

Cost: Sold outright at published list prices. As of November 2026, panels start at $315 and anteroom packages start at $3,570 on its own site.

Where the proof runs out: No ICRA class, sound rating, or hourly fire rating is published, and the test lab isn’t named. The gauge is a local digital readout with no alerts or logs described. Height caps at 12 feet, and there’s no rental program.

7. HEPACART: best for documented containment under one ceiling tile

HEPACART is the best fit for the smallest jobs on the permit board: one tile, one doorway, one afternoon.

Paperwork: The company rates its Classic cart, AnteRoom, HEPAROOM, and AIR 1100 negative air machine for ICRA Classes I through V. The Classic cart includes a manometer as a negative air indicator, and the AnteRoom includes a magnehelic one.

On a hospital job: CDC guidance notes that even minor work, like opening a ceiling for inspection or pulling cable, can put dust in the air. A Classic cart parks under that opening with a 750 CFM fan and HEPA filtration, and it reaches 10’6″ with its standard enclosure.

The AnteRoom seals magnetically to a door frame for room isolation, and the company says it sets up tool-free in under five minutes. HEPAROOM builds the negative air machine into the anteroom itself.

HEPACART also sells the same RealWall and LiteBarrier panels as the first pick on this list, and it’s a certified repair specialist for them.

Cost: As of November 2026, its web shop lists the Classic cart at $10,590 to $12,035, the AnteRoom at $6,429 to $7,452, and the AIR 1100 at $1,595.

Where the proof runs out: A cart or door module contains one ceiling opening or one doorway, so it won’t close off a corridor. The standard AnteRoom needs a separate negative air machine. Ask for a fire test report on the enclosure fabric, which the company describes as fire-resistant.

8. ZipWall: best for short, low-dust tasks under plastic

Paperwork: ZipWall claims no ICRA class for any product. Its poles are described as working with positive and negative air, its door kits are described as flame-retardant, and its own 3-mil plastic sheeting is labeled as not flame-retardant.

On a hospital job: Spring-loaded poles hold sheeting floor to ceiling in a few minutes, and ZipWall says its barriers are widely used in healthcare. That lines up with CDC guidance, which points to plastic sheeting for short-term work that makes minimal dust.

The poles accept sheeting from 1 mil to about 10 mil, including many fire-rated and reinforced plastics. FoamRail tapeless seals run along floors, ceilings, and walls up to 9 feet high.

ZipWall is candid about where its product stops. For longer-term projects, a healthcare article on its own site points to semi-permanent paneled barriers.

Cost: As of November 2026, list prices on its own site are $98.95 for a 2-pack of 10-foot poles and $212.25 for a 4-pack. A ZipFast Multi-Pack of reusable panels lists at $189, and the full Dust Barrier Toolkit at $1,414.16.

Where the proof runs out: The fire paperwork has to come from whoever makes the sheeting you hang. The Joint Commission’s FAQ says unrated flammable plastic sheets don’t qualify as temporary barriers, so the sheeting’s rating decides whether the setup passes. ZipWall makes no sound claim.

From scorecard to submittal

Read the scorecard against the class on your permit. For Class IV and V work, ASHE’s tool asks for barriers that meet NFPA 241, run to the ceiling or the deck above, and stay under monitored negative pressure. That’s the class statement, the fire data, and the pressure log working together.

If your code official calls for a rated wall, the list gets short. FireblockWall is the one barrier here with a published one-hour ASTM E119 rating, so ask every other maker what they’d submit in its place.

If the gap in your file is the pressure record, look at Rapid Room’s exportable log or Abatement Technologies’ monitors. Ask each one how the record gets handed to infection control.

For short, low-dust tasks, a HEPACART unit or ZipWall poles with rated sheeting may be all the ICRA calls for. I’d still ask for the same paperwork, because a short job still lands in the project file.

The packet to bring to the ICRA meeting

Collect these before the pre-construction meeting, and hand over copies.

  • The maker’s written ICRA class statement for the exact product line you’re installing.
  • The ASTM E84 test report, with the flame spread and smoke-developed numbers.
  • The fire-resistance listing, if your code official and the hospital’s life safety plan call for a rated wall.
  • Cut sheets for the negative air machine, including HEPA filtration tested at 99.97% efficiency or better if exhaust stays indoors.
  • The pressure monitoring plan: which device, where it mounts outside the containment, and who reads it.
  • The cleaning instructions for the panel surface, matched to the facility’s approved disinfectants.

One more line belongs on the cover sheet. ASHE’s tool has an infection preventionist and an engineering representative inspect before precautions are downgraded, so write down who those two people are (and get their cell numbers while everyone’s still in a good mood).

FAQ

What makes a dust barrier compliant in a hospital?

A dust barrier is compliant when it meets the precautions the hospital’s own ICRA assigns to the project and the fire rules the code official enforces. No product carries that status by itself, so the facility’s team reviews the paperwork for each job.

Is plastic sheeting allowed for hospital construction barriers?

Sometimes: ASHE’s ICRA 2.0 tool allows plastic or hard barriers for Class IV and V work if the plastic is fixed floor to ceiling, secured, and meets NFPA 241. The Joint Commission says unrated flammable plastic sheeting doesn’t qualify as a temporary barrier.

What fire rating do hospital dust barriers need?

Your adopted code and the authority having jurisdiction set it, so check with the code official and the hospital’s life safety plan. The Joint Commission requires temporary construction partitions to be smoke-tight and built of noncombustible or limited-combustible materials.

Subscribe to Newsletter

Get the latest in technology, business, and culture in your inbox.